Catalog 2025 – Page 69
Complet Kit 1972 / 1975
For DS 21 Électronique Injection
Bare standard kit : | |
Ass + doors (10046 € + 2626 €) | 13375 € |
Rear trunk | 470 € |
2 Rear trunk tipping compasses. Ref. 5 + 5a, Plate 1 | 183 € |
Raw materiel carries | 250 € |
2 New green tinted windows | 380 € |
2 Convertible window rails with rubber seals | 96 € |
2 Door opening rods | 24 € |
Fuel tank flap. Ref. 26, plate 2 | 50 € |
A sale contact | 15 € |
2 Corner strips. Ref. 12 + 12A, Plate 8 | 44 € |
Total bare standard kit : | 14827 € |
Full hood mechanism | 3987 € |
Bare hood mechanism (694 spoiler + 1143 arches) | 2166 € |
2 Spring nipples | 10 € |
2 Original rubber stamps « L » Conforming original | 16 € |
4 Rubber ridgers | 6 € |
2 Aluminum caps | 8 € |
14 Polished stainless steel bolts | 98 € |
32 Fiber gasket | 43 € |
2 Springs wrapped in leather Ref : 9 + 9A, plate 3 | 65 € |
2 Wooden stocks. Ref. 3 + 3A, Plate 8 | 106 € |
2 Rubber seals for the heels of wooden stock | 20 € |
3 Polichinelle arch intérior woodwork Ref : 9 + 9A + 10, plate 8 | 118 € |
2 Frame woodwork. Ref. 10 + 10A, Plate 2 | 108 € |
2 Small hood box trim. Ref. 5 + 5A, Plate 8 | 55 € |
1 Chromed brass handle. Ref. 14, Plate 3 | 25 € |
2 Hood buckles. Ref. 1, Plate 3 | 260 € |
1 Aluminum spoller strip | 55 € |
4 Aluminum profiles. Ref. 2, Plate 3 | 122 € |
4 Cowling seals. Ref. 3, Plate 3 | 200 € |
2 Stepped legs.Ref. 21, Plate 3 | 89 € |
2 Chrome side springs. Ref. 19, Plate 3 | 90 € |
2 Large stainless steel bolts with washer. Ref. 158, plate 3 | 13 € |
2 Brass eccentrics | 112 € |
2 Flat polished stainless steel stocks | 55 € |
1 Polished aluminum strip with stainless steel screws. Ref. 6, Plate 8 | 80 € |
1 spoonbill woodwork | 12 € |
Reinforcements and connecting plates : | |
Ref. 22, plate 3A ready-to-install | 694 € |
2 Internal reinforcements. Of window post. Ref. 13 and 13 A, Plate 2 | 146 € |
2 Exterior pillar reinforcements. Ref. 12 and 12 A, Plate 2 | 133 € |
2 Jack nipples | 38 € |
2 Panels under door. Ref. 23 and 23 A, Plate 2 | 163 € |
2 Stainless steel L-shaped brackets for front fixing of running boards | 10 € |
2 Corner reinforcement sheets. Ref. 21 + 21 A, Plate 1 | 48 € |
Catalog 2025 – Page 70 | |
2 Z-sheets. Ref. 12 and 12 A, plate 1 | 96 € |
2 Horizontal panels for the top of the wheel arch. Ref. 11 and 11 A, Plate 1 | 92 € |
2 Gutter extension gussets. Ref. 8 + 8 A, Plate 1 | 42 € |
4 Soft top box wedging gussets. Ref. 9 + 9 A, Plate 1 | 53 € |
9 Prisoners to be welded (stainless steel prisoners + steel cages) | 28 € |
2 Mudguard panels. Ref. 10 + 10 A, Plate 1 | 86 € |
1 Trunk bottom vertical panel. Ref. 15, Plate 1 | 74 € |
1 Boot striker plate. Ref. 22, Plate 1 | 88 € |
2 Travel joint lengths. Ref. 23, Plate 1 | 90 € |
2 Rear wing struts | 28 € |
1 Cant bar housing cover (plainted gloss black) | 86 € |
1 Large drawer under hood box (painted gloss black) | 103 € |
2 Exterior body reinforcements. Ref. 4 and 4 A, Plate 7 | 320 € |
2 Internal body reinforcement. Ref. 2 and 2 A, Plate 7 | 264 € |
1 Bench foot reinforcement. Ref. 3, Plate 7 | 117 € |
1 Closing plate. Ref. 13, Plate 1 | 40 € |
1 Central reinforcement plate. Ref. 1, Plate 7 | 170 € |
1 Rear reinforcement (in the boot). Ref. 5, Plate 7 | 107 € |
2 Spar adjustment plates. Ref. 19 + 19 A, Plate 2 | 16 € |
6 Rainwater evacuation hoses. Ref. 7 + 7 A, Plate 1 | 42 € |
Total reinforcement and bindings | 3174 € |
Total body parts | 21988 € |
Trim elements, chrome and stainless steel | 12611 € |
1 Set of rubber flaps with metal fixings | 81 € |
Covering of diamond tipped aluminum beams | 204 € |
Jack nipple riders, set of 4 stainless steel parts with foam seals | 66 € |
Int/Ext. window seal with set of new stapples.Ref. 7 + 7A, Plate 2 | 245 € |
2 Chrome door strikers 72-75 | 64 € |
2 Chrome door strikers new 64-71 | 130 € |
2 Door guides. Ref. 6, Plate 9 | 115 € |
2 Door opening mechanisme, last model. Ref. 24, Plate 9 | 160 € |
2 Flat polished stainless steel or restored samak external handles | 242€ |
4 Chrome wing well caps. Ref. 16, Plate 9 | 40 € |
4 Convertible door seals. Ref. 4, Plate 3 | 180 € |
2 Engraved stainless steel riser covers (Sold with next : 6 pieces) | + |
2 Engraved stainless steel step (Sold with next & previous : 6 pieces) | + |
2 Engraved stainless steel door bottom trims (Sold with previous : 6 pieces) | 650 € |
2 Running board finishing rubber seals | 12 € |
2 Door heel foam seals | 12 € |
4 Strips on the inside folds of the bottom of the door. Ref. 9, Plate 9 | 210 € |
2 Stainless steel moldings with rails on interior door rebate. Ref. 1, Plate 9 | 325 € |
2 Upper stainless steel strips for holding the leather door panels | 185 € |
2 Stainless steel lower strips for holding the leather door panels | 138 € |
2 Stainless steel strips for holding carpets. Ref. 15 and 15 A, Plate 9 | 185 € |
2 New or restored chrome interior handles. Ref. 21 and 21 A, Plate 9 | 152 € |
2 Polished stainless steel bowls. Ref. 22, Plate 9 | 35 € |
4 Stainless steel chopsticks, policeman’s hat + 6 stainless steel chopsticks waistline | 1026 € |
66 Strip fixing plates, in stainless steel with nuts and washers | 60 € |
2 Chrome reflector holders. Ref. 25 and 25 A, Plate 2 | 275 € |
2 Chrome wing skids. Ref. 28 and 258 A, Plate 2 | 320 € |
2 Rear wing indicators. Ref. 6 and 6 A, Plate 2 | 1230 € |
Catalogue 2025 – Page 71. | |
2 New rafters with fixings | 20 € |
4 New elements with “DS 21” monogram | 35 € |
1 Spécial convertible license plate holder | 246 € |
2 Rear light holders | 96 € |
4 Lucas L692 lights | 196 € |
2 Remanufactured Lucas L467 lights | 104 € |
2 Pallas stainless steel for carpet protection | 90 € |
1 Pallas stainless steel height selector | 40 € |
1 Pallas trunk tail T.B.E. or re-chromed. | 65 € |
1 Boot seal in foam rubber. Ref. 33, Plate 2 | 42 € |
2 Leather wrapped trunk springs. Ref. 6 and 6 A, Plate 1 | 66 € |
2 Tilting seat frames | 315 € |
2 New seat locks. Ref. 7 + 7 A, Plate 5 | 300 € |
2 Stainless steel slide trim | 96 € |
2 Higt point seat belt anchorages (R-L) | 57 € |
2 Front retractable seat belts | 364 € |
1 Edge lamp Citroen | 45 € |
1 Chrome heating outlet + 1 stainless steel trim | 95 € |
2 Chrome sun visor supports new model | 70 € |
2 Re-chomed Pallas sun visor arms (in standard exchange) | 66 € |
1 Upper bay rubber seal. Ref. 17 + 17 A, Plate 2 | 60 € |
2 Stainless steel doorway. Ref. 11 and 11 A, Plate 2 | 62 € |
2 Stainless stell top of window with stainless steel gasket. Ref.14 and 14 A, Plate 2 | 650 € |
1 Bay top rubber seal. Ref. 17, Plate 3 | 55 € |
1 Aluminum window top. Ref. 20, Plate 3 | 50 € |
1 Grey windscreen seal with long lip, special convertible | 75 € |
1 Convertible rear bumper. Ref. 35, Plate 2 | 1410 € |
2 Stainless steel hood box strips with small central seal. Ref. 4 and 4 A, Plate 2
+ 1 set of 7 nylon shims |
667 € |
2 Stainless steel door top strips. Ref. 5 and 5a, Plate 2 | 170 € |
2 Chrome exterior mirrors with stapples Ref. 23, Plate 9 | 170 € |
2 New stainless steel front indicators | 150 € |
2 Stainless steel headligt rings with stainless steel seal | 152 € |
2 Black époxy reversing light bracket | 50 € |
2 Reversing lights in good condition (grey plastic) | 80€ |
1 Refurbished interior black mirror with foot for reconditioned windscreen | 60 € |
Upholstery and insulation including supports and carpets | 10715 € |
1 Set of body insulation. Ref. 3+4+6+6A+8+8A+9+18, Plate 4 | 239 € |
1 14 piece black leather upholstery (5+5A, plate 4and sheet metal to the height selector) | 8636 € |
1 Boot trim set. Ref. 14+15+15A+16+16A+17+19, Plate 4 | 568 € |
1 Set of carpets on natural jute + covering box « IE » | 1102 € |
1 Dunlopilo game new | 170 € |
Elements common to the sedan in standard exchange (21IE-BH version) |
7917 € |
5 Refurbished rims with central nut | 600 € |
4 Pallas stainless steel wheel covers in 380 re-polished | 600 € |
2 Wide chrome wiper arms | 80 € |
2 Black wiper blades | 33 € |
1 HP pump (3 pulleys) LHM | 378 € |
1 LHM re-clutch corrector | 181 € |
6 LHM spheres | 480 € |
1 Centrifugal regulator LHM | 186 € |
Catalog 2025 – Page 72. | |
1 LHM steering rack | 872 € |
2 LHM height correctors | 184 € |
1 Sand air filter, primed and repainted | 120 € |
1 Complete clutch (mechanism = 405 € ; disc = 267 € ; thrust bearing = 97 €) | 823 € |
1 68-75 Alternator regulates with its regulator | 298 € |
1 Reconditioned front bumper | 878 € |
1 Refurbished contactor | 120 € |
1 Latest model copper beam engine radiator + new probe | 533 € |
1 Heating radiator overhauled Or with new harness | 98 € |
2 Brake calipers 66-75 | 293 € |
4 Reconditioned or original front light optics in very good condition | 380 € |
1 Set of 3 barrels with 2 keys (ignition, doors, trunk) | 175 € |
1 On-board assembly, sandblasted and repaintd (stand+crank) | 80 € |
4 Sheet metal elements of the dashboard, reconditioned in vermiculated blak paint | 335 € |
3 Horns (one road + one city) reconditioned+1 vacuum horn | 190 € |
Elements common to the sedan, mounted as new (21 IE-BH Version) | 7363 € |
3 comodos 70/75 new or very good condition | 240 € |
1 Water pump 66-75 | 72 € |
1 Batch of new water hoses for DS 21 IE BH | 268 € |
1 Thermostat DS 21 | 17 € |
2 Dynamic headlight control lever tips | 24 € |
2 Rubber seals between front wings and doors | 26 € |
2 Rubber seals between front fenders and bonnet + stapples | 36 € |
2 Rubber seals between front fenders and bumpers + stapples | 27 € |
3 foam rubber seals of apron nozzles | 24 € |
1 Apron edge rubber seal + staples | 21 € |
1 front police plate rubber seal | 12 € |
4 Coffee makers (2 front + 2 rear) | 242 € |
1 Gray heating sleeve with foam | 12 € |
4 insulated heating ducts
|
60 € |
4 Meters of small air duct | 37 € |
1 Thermostatic valve for the heating radiator | 165 € |
8 New round stops (for front and rear arms) | 40 € |
4 Pivot ball joint covers | 24 € |
1 Set of parking brake pads with anti-noise clips | 38 € |
1 Pair of brake discs | 90 € |
1 Set of brake pads | 76 € |
1 Renovation kit for the front and rear suspension cylinders | 63 € |
1 Set dust cover with balls and stapples for rear suspension | 141 € |
1 Set of rear brake pads | 50 € |
1 Renovation kit for the rear brake cylinders | 35 € |
2 Bellows and 2 rubber protections for transmission | 100 € |
4 Michelin XAS 185/15 tires (with tubes + mounting, balancing) (DS 21 IE) | 1316 € |
1 DS battery (VARTA) | 180 € |
1 Valéo starter or equivalent, new (9 teeth) | 242 € |
Starter relay « MARGUERITE » | 75 € |
1 New ignition coil | 61 € |
1 New ignition harness with plastic caps | 28 € |
4 New insulating tubes | 9 € |
4 New candles | 13 € |
Clutch cylinder renovation kit | 53 € |
1 Oil filter with its large cardboard gasket | 14 € |
1 New head gasket | 29 € |
1 Set of new body caps (metal and rubber, 22 pièces) | 66 € |
1 New grey leatherette bellows for the large aluminum duct, with frame | 143 € |
Catalogue 2025 – Page 73. | |
1 Set of spare wheel fixing straps | 41 € |
1 « T » sheet under engine | 115 € |
1 Triplex windshield tint | 255 € |
1 Sealing kit (Américan mastic) | 30 € |
1 Set of special ID/DS licence plates | 76 € |
1 Gear sélector rubber seal | 22 € |
1 New electric fuel pump (plan modification of the circuit) | 396 € |
1 Fuel filter (before the fuel pump) | 9 € |
1 New fuel tank | 534 € |
1 Inner fuel tank gauge | 75 € |
4 New Bosch injectors | 928 € |
2 Motor mounts | 127 € |
5 New transmission belts | 42 € |
1 Roll of U-shaped foam seals | 21 € |
1 Set of new LHM hoses for DS 21 IE BH | 202 € |
2 New rear brake hoses | 76 € |
10 Liters of LHM | 125 € |
Various consumables (Ligarex coliers, cables, lugs, etc.) | 120 € |
Summary : |
|
Naked standard kit | 14827 € |
Full hood mechanism | 3987 € |
Reinforcements and connecting plates | 3174 € |
Trim elements including chrome and stainless steel | 12611 € |
Upholstery and insulation including supports and carpets | 10715 € |
Total specific convertible parts | 45314 € |
Elements common to the sedan in standard exchange | 7917 € |
Elements common to the sedan fitted new | 7363 € |
Total kit complet 72/75 | 60594 € |