Complete Kit 60-65
Catalogue 2026 – Page 46
| Bare standard kit : | |
| Ass + doors (9520+2682 ) | 12202€ |
| Door of Rear trunk Ref. 1, Plate 2, | 470 € |
| 2 rear trunk tipping compasses Ref. 5 + 5a, Plate 1 | 215 € |
| Raw material doors | 250 € |
| 2 new white windows | 320 € |
| 2 Convertible window rails with rubber seals | 101 € |
| 2 door opening rods | 15 € |
| Fuel tank flap Ref. 26, Plate 2 | 50 € |
| A safe contact | 15 € |
| 2 corner strips Ref 12+12A, Plate 8 | 44 € |
| Total bare kit: |
13682€ |
| Full hood mechanism | 3958 € |
| Bare hood mechanism (694 spoiler + 1143 arches) | 2166 € |
| 2 Spring pins | 10 € |
| 2 Rubber stamps « L » conforms to the original | 22 € |
| 4 rubber stoppers | 6 € |
| 2 aluminum caps | 8 € |
| 14 polished stainless steel bolts | 98 € |
| 32 Fiber seals | 43 € |
| 2 Springs wrapped in leather Ref : 9 + 9A Planche 3. | 65 € |
| 2 wooden stocks Ref. 3 + 3 a, Plate 8 | 110 € |
| 2 rubber seals for the heels of wooden stock | 20 € |
| 3 arch interior woodwork « Polichinelle » Ref : 9 + 9A +10 Planche 8. | 105 € |
| 2 Frame woodwork Ref. 10 + 10a, Plate | 90 € |
| 2 Small hood box trim Ref. 5 + 5a, Plate 8 | 50 € |
| 1 Chromed brass handle Ref 14, Plate 3 | 25 € |
| 2 Hood buckles Ref. 1, Plate 3 | 260 € |
| 1 aluminum spoiler strip | 55 € |
| 4 Aluminum profiles Ref. 2, Plate 3 | 122 € |
| 4 Cowling seals Ref. 3, Plate 3 3 | 200 € |
| 2 Stepped legs Ref. 21, Plate 3 | 75 € |
| 2 chrome side springs Ref. 19, Plate 3 | 88€ |
| 2 Large stainless steel bolts with washer Ref. 18, Plate | 13 € |
| 2 brass eccentrics | 112 € |
| 2 flat polished stainless steel stocks | 68 € |
| 6 polished stainless steel plates | 55 € |
| 1 Polished aluminum strip with stainless steel screws Ref. 6,Plate 8, | 80 € |
| 1 spoonbill woodwork | 12 € |
| Reinforcements and connecting plates : | |
| Ref. 22, Plate 3 A ready-to-install Convertible bay top | 715 € |
| 2 internal reinforcements. of window post Ref. 13 and 13a, Plate 2 | 146 € |
| 2 Exterior pillar reinforcements Ref. 12 and 12 a, Plate 2 | 133 € |
| 2 Jack nipples | 38 € |
| 2 Panels under door Ref. 23 and 23a, Plate 2 | 153 € |
| 2 stainless steel L-shaped brackets for front fixing of running boards | 10 € |
| 2 corner reinforcement sheets Ref. 21 + 21a, Plate 1 | 48 € |
| Catalogue 2026 – Page 47 | |
| 2 Z-sheets Ref. 12 and 12a, Plate 1 | 96 € |
| 2 Horizontal panels for the top of the wheel arch, Ref. 11 and 11a, Plate 1 | 92 € |
| 2 gutter extension gussets, Ref. 8 + 8a, Plate 1 | 42 € |
| 4 Soft top box wedging gussets, Ref. 9 + 9a, Plate 1 | 53 € |
| 9 Prisoners to be welded (stainless steel prisoners + steel cages) | 28 € |
| 2 Mudguard panels Ref. 10 + 10a, Plate 1 | 86 € |
| 1 Trunk bottom vertical panel Ref. 15, Plate 1 | 74 € |
| 1 Boot striker plate Ref. 22, Plate 1 | 88 € |
| 2 Travel joint lengths Ref. 23, Plate 1 | 90 € |
| 2 rear wing struts | 34 € |
| 1 Cant bar housing cover (painted gloss black) | 75 € |
| 1 Large drawer under hood box (painted gloss black) | 103 € |
| 2 Exterior body reinforcements Ref. 4 and 4a, Plate 7 | 340 € |
| 2 Internal body reinforcements Ref. 2 and 2a, Plate 7 | 250 € |
| 1 Bench foot reinforcement Ref. 3, Plate 7 | 110 € |
| 1 Closing plate Ref. 13, Plate 1 | 40 € |
| 1 Central reinforcement plate Ref. 1, Plate 7 | 150 € |
| 1 Rear reinforcement (in the boot) Ref. 5, Plate 7 | 100 € |
| 2 Spar adjustment plates, Ref. 19 + 19a, Plate 2 | 16 € |
| 6 Rainwater evacuation hoses Ref. 7 + 7a, Plate 1 | 42 € |
| Total reinforcements and bindings | 3157 € |
| Total body parts | 20797€ |
| Trim elements, chrome and stainless steel | 11514 € |
| 1 Set of rubber flaps with metal fixings | 81 € |
| Covering of diamond-tipped aluminum beams | 224 € |
| Jack nipple riders, set of 4 stainless steel parts with foam seals | 66 € |
| Int/ext window seal with set of new Stapples Ref 7+7A, Plate 2, | 225 € |
| 4 original re-chromed door strikers | 220 € |
| 2 Door guides Ref. 6, Plate 9, | 115 € |
| 2 Door opening mechanisms Ref. 4, Plate 9, | 155 € |
| 4 chrome wing well caps Ref. 16, Plate 9, | 40 € |
| 4 Convertible door seals Ref. 4 Plate 3, | 180 € |
| 4 stainless steel ribbed stair riser and door bottom trims | 320 € |
| 2 wide stainless steel step covers | 250 € |
| 2 running board finishing rubber seals | 12 € |
| 4 Strips on the inside folds of the bottom of the door Ref. 9 | 210 € |
| 2 door heel foam seals | 12 € |
| 2 stainless steel lower strips for holding the leather door panels | 138 € |
| 2 upper stainless steel strips for holding the leather door panels | 185 € |
| 2 stainless steel strips for holding carpets Ref. 15 and 15a, Plate 9 | 185 € |
| 2 new or restored chrome interior handles Ref. 21 and 21A,Plate 9 | 152 € |
| 4 stainless steel chopsticks, policeman’s hat + 6 stainless steel chopsticks,waistline | 986 € |
| 66 Strip fixing plates, in stainless steel with nuts and washers | 60 € |
| 2 Chrome reflector holders Ref. 25 and 25a, Plate 2, | 295 € |
| 2 chrome wing skids Ref. 28 and 28a, Plate 2, | 320 € |
| 2 Rear wing indicators Ref. 6 and 6a, plate 2, restored originals | 1230 € |
| 2 new rafters with fixings | 22 € |
| 1 Rear Police license plate holder, special convertible | 254 € |
| 2 rear light holders | 108 € |
| 4 Lucas L538 lights | 320 € |
| 2 original Lucas L467 lights | 128 € |
| 1 Rear trunk tail in chromed aluminum | 45 € |
| Catalogue 2026 – Page 48 | |
| 1 Boot seal in foam rubber Ref. 33, Plate 2, | 42 € |
| 2 leather-wrapped trunk springs Ref. 6 and 6a, Plate 1 | 66 € |
| 2 Seat runner frame Ref. 11 and 11 a, Plate 5 | 250 € |
| 4 seat rockers | 132 € |
| 2 new seat locks Ref. 7 +7a, Plate 5 | 300 € |
| 4 stainless steel slide trims + 8 chrome bolts (196 + 24) | 200 € |
| 1 Chapron edge lamp (60/67) | 140 € |
| 1 chrome heating outlet + 1 stainless steel trim | 95 € |
| 2 Chrome sun visor supports | 100 € |
| 2 stainless steel inner bay amount ref: 17/17A, board 2 | 60 € |
| 2 Stainless steel doorway Ref. 11 and 11 a, Plate 2 | 62 € |
| 2 Stainless steel top of window with stainless steel gasket Ref. 14 and 14a, Plate 2 | 650 € |
| 1 Upper bay rubber seal Ref. 17, Plate 3 | 55 € |
| 1 Aluminum window top Ref. 20, Plate 3 | 50 € |
| 1 Grey windscreen seal with long lip, special convertible | 75 € |
| 1 Convertible rear bumper Ref. 35, Plate 2 | 1410 € |
| 2 Stainless steel hood box strips with small central sealRef. 4 and 4a, Plate 2 | 667 € |
| 2 stainless steel door top strips Ref. 5 and 5a, Plate 2 | 170 € |
| 2 Chrome exterior mirrors with Stapples Ref. 23, Plate 9 | 170 € |
| 1 Refurbished interior mirror plus chrome | 235 € |
| 1 gooseneck for interior mirror (in standard exchange) | 45 € |
| Upholstery and insulation including supports and carpets | 11088 € |
| 1 Set of body insulation Ref 3+4+6+6A+8+8A+9+18, Plate 4 | 239 € |
| 1 – 12 pieces black leather upholstery (+5+5a Plate 4 and sheet metal against the height selector) | 9017 € |
| 1 Boot trim set Ref 14+15+15A+16+16A+17+19, Plate 4 | 560 € |
| 1 Set of carpets on natural jute | 1.102 € |
| 1 Dunlopilo game new | 170 € |
| Elements common to the sedan in standard exchange | 10059 € |
| 5 Refurbished rims with central nut | 600 € |
| 4 stainless steel wheel covers in 400, debossed and polished | 540 € |
| 2 special stainless steel wiper blades for thin arms | 60 € |
| 2 Thin chrome wiper arms | 80 € |
| 1 Re-clutch corrector LHS2 reconditioned LHM | 186 € |
| 1 HP pump (3 pulleys) LHM painted black | 378 € |
| 6 LHM Spheres painted black | 486 € |
| 1 LHM centrifugal regulator painted black | 191 € |
| 1 LHM steering rack painted black | 885 € |
| 2 LHM height correctors | 224 € |
| Hydraulic Block reconditioned at LHM | 233 € |
| 1 Revised 3-stage Weber carburettor with original parts | 550 € |
| 1 Carburettor hydraulic control painted black | 78 € |
| 1 Starter 60-65 | 350 € |
| 1 Air filter sandblasted primed and repainted | 120 € |
| 1 Dynamo 60-65 adjusted with its regulator | 33 € |
| 1 Reconditioned front bumper (63-67) | 868 € |
| 1 Engine radiator with 2 rows of tubes, copper harness | 344 € |
| 1 Heating radiator overhauled or with new harness | 98 € |
| 2 Reconditioned headlight optics | 220 € |
| 2 rechromed or new main optical rims | 120 € |
| 1 set of 4 barrels with 2 keys (ignition, doors and trunk) | 220 € |
| 1 Embedded set sanded repainted crank stand | 80 € |
| Catalogue 2026 – Page 49. | |
| 2 horns (one city + one road) refurbished | 90 € |
| 1 reconditioned LHM contactor and painted black | 120 € |
| 2 front brake calipers 60/65 (with new mobile pad) In standard exchange | 1148 € |
| 1 Revised 3-stage fuel pump | 272 € |
| 1 Complete clutch (with disc and stopper) | 823 € |
| 1 Original igniter Refurbished with electronic assistance | 240 € |
| 1 restored blinker panel | 120 € |
| Elements common to the sedan fitted new | 5871 € |
| 1 New water pump (old model) | 242 € |
| 1 Set of new water hoses | 181 € |
| 1 Thermostat DS19 | 18 € |
| 2 Motor mounts painted black | 131 € |
| 2 Rubber seals between front wings and doors | 26 € |
| 2 rubber seals between front fenders and bonnet + Stapples | 36 € |
| 2 rubber seals between front fenders and bumpers + stapples | 27 € |
| 1 Rubber seal for apron edge + staples | 21 € |
| 4 coffee makers (2 front + 2 rear) | 242 € |
| 1 New fuel tank | 461 € |
| 1 Internal fuel tank gauge | 75 € |
| 1 Grey heating sleeve with foam | 12 € |
| 1 Throttle control Silent-bloc | 21 € |
| 2 insulated heating ducts | 42 € |
| 4 Meters of small air duct | 41 € |
| 4 front arm rubber stops | 20 € |
| 4 new rear arm stops, Convertible break type | 61 € |
| 4 Capotes de rotules de pivot | 20 € |
| 1 Pair of brake discs | 175 € |
| 1 Set of brake pads | 83 € |
| 2 hoses + swivel fittings replacement kit | 221 € |
| 1 Clutch cylinder renovation kit | 27 € |
| 1 Renovation kit for front and rear suspension cylinders | 51 € |
| 1 Set of dust covers with ball and stapples for rear suspension | 110 € |
| 2 crenulated rubber silent-blocs for transmission | 83 € |
| 2 Bellows and 2 rubber protections for transmission | 93 € |
| 1 Set of rear brake linings | 50 € |
| 1 Rear brake cylinder renovation kit | 31 € |
| 2 Michelin X 165/400 tires (with tubes, mounting, balancing) | 650€ |
| 2 Michelin X 155/400 tires (with tubes, mounting, balancing) | 626 € |
| 1 DS battery (WARTA) | 180 € |
| Starter relay « MARGUERITE » | 75 € |
| 1 new ignition coil | 55 € |
| 4 new candles | 13 € |
| 1 New ignition harness with plastic caps | 30 € |
| 4 Insulators for candles | 9 € |
| 1 cylinder head gasket | 29 € |
| 1 Set of new body caps (metal and rubber, 22 pieces) | 66 € |
| 1 new grey leatherette bellows for the large aluminum duct with frame | 147 € |
| 1 Set of spare wheel fixing straps | 43 € |
| 1 “T” sheet metal under engine | 168 € |
| 1 Clear triplex windscreen | 248 € |
| Catalogue 2026 – Page 50 | |
| 1 Sealing kit (American mastic) | 30 € |
| 1 fuel filter (before the fuel pump) | 9 € |
| 1 License plate set | 76 € |
| 1 Gear selector rubber seal | 24 € |
| 2 new front indicators (not Pallas) | 180 € |
| 5 new transmission belts | 42 € |
| 3 stainless steel cones for dashboard buttons | 30 € |
| 1 Roll of U-shaped foam seal | 23 € |
| 1 Oil filter with large cardboard seal | 11 € |
| 1 Set of new LHM hoses | 140 € |
| 10 Liters of LHM | 125 € |
| Various consumables ID or DS (Ligarex collars, cables, lugs, etc.) | 120 € |
| SUMMARY | |
| Naked standard kit | 13682€ |
| Full hood mechanism | 3958 € |
| Reinforcements and connecting plates | 3157 € |
| Trim elements including chrome and stainless steel | 11514 € |
| Upholstery and insulation including supports and carpets | 11088 € |
| Total specific Convertible parts | 43399€ |
| Elements common to the sedan in standard exchange | 10059€ |
| Elements common to the sedan fitted new | 5871 € |
| Total complete standard kit 60-65 : | 59229€ |