Catalog 2022 – Page 54.
Complete Kit Convertible 1968
Bare standard kit : | |
Ass + doors (9 346 € + 2 500 €) | 11 846 € |
Rear trunk | 470 € |
2 rear trunk tipping compasses, Ref. 5 + 5a, | 198 € |
Raw material carries | 350 € |
2 new white windows | 270 € |
2 Convertible window rails with rubber seals | 72 € |
2 door opening rods | 22 € |
Fuel tank flap, Ref. 26, Plate 2 | 40 € |
A safe contact | 15 € |
2 corner strips ref. 12+12A, Plate 8 | 33 € |
Total bare standard kit : | 13 316 € |
Full hood mechanism | 3 252 € |
Bare hood mechanism (680 spoiler + 911 arches) | 1 591 € |
2 spring nipples | 10 € |
2 Original rubber stamps L | 14 € |
4 rubber ridgers | 5 € |
2 aluminum caps | 8 € |
14 polished stainless steel bolts | 75 € |
32 Fiber gasket | 43 € |
2 Springs wrapped in leather | 65 € |
2 wooden stocks Ref. 3 + 3a, plate 8 | 100 € |
2 rubber seals for the heels of wooden stock | 20 € |
3 Polychinelle arch interior woodwork | 81 € |
2 Frame woodwork, Ref. 10 + 10a, plate 2 | 76 € |
2 Small hood box trim, Ref. 5 + 5a, Plate 8 | 30 € |
1 Chromed brass handle, Ref 14, Plate 3 | 20 € |
Catalogue 2022 – Page 55. | |
2 Hood buckles Ref. 1, Plate 3 | 310 € |
1 aluminum spoiler strip | 55 € |
4 Aluminum profiles Ref. 2, Plate 3 | 122 € |
4 Cowling seals Ref. 3, Plate 3 | 200 € |
2 Stepped legs Ref. 21, Plate 3 | 49 € |
2 chrome side springs Ref. 19, Plate 3 | 100 € |
2 Large stainless steel bolts with washer Ref. 18, plate 3 | 13 € |
2 brass eccentrics | 70 € |
2 flat polished stainless steel stocks | 60 € |
6 polished stainless steel plates | 55 € |
1 Polished aluminum strip with stainless steel screws Ref. 6, Plate 8 | 80 € |
Reinforcements and connecting plates : | |
Ref. 22, Plate 3 A ready-to-install convertible bay top | 635 € |
2 internal reinforcements. of window post Ref. 13 and 13a, Plate 2 | 132 € |
2 Exterior pillar reinforcements Ref. 12 and 12 a, Plate 2 | 110 € |
2 Jack nipples | 33 € |
2 Panels under door Ref. 23 and 23a, Plate 2 | 126 € |
2 stainless steel L-shaped brackets for front fixing of running boards | 13 € |
2 corner reinforcement sheets Ref. 21 + 21a, Plate 1, | 27 € |
2 Z-sheets Ref. 12 and 12a Plate 1, | 80 € |
2 Horizontal panels for the top of the wheel arch, Ref. 11 and 11a, Plate 1 | 81 € |
2 gutter extension gussets. Ref. 8 + 8a, Plate | 44 € |
4 Soft top box wedging gussets Ref. 9 + 9a, Plate | 50 € |
9 Prisoners to be welded (stainless steel prisoners + steel cages) | 24 € |
2 Mudguard panels Ref. 10 + 10a, Plate 1 | 94 € |
1 Trunk bottom vertical panel Ref. 15, Plate 1 | 77 € |
1 Boot striker plate Ref. 22, Plate 1 | 61 € |
2 Travel joint lengths Ref. 23, Plate 1 | 90 € |
2 rear wing struts | 22 € |
1 Cant bar housing cover (painted gloss black) | 63 € |
1 Large drawer under hood box (painted gloss black) | 82 € |
2 Exterior body reinforcements, Ref. 4 and 4a, Plate 7 | 334 € |
2 Internal body reinforcements, Ref. 2 and 2a, Plate 7 | 230 € |
1 Bench foot reinforcement, Ref. 3, Plate 7 | 88 € |
1 Closing plate, Ref. 13, Plate 1 | 33 € |
1 Central reinforcement plate, Ref. 1, Plate 7 | 121 € |
1 Rear reinforcement (in the boot), Ref. 5, Plate 7 | 94 € |
2 Spar adjustment plates, Ref. 19 + 19a, Plate 2 | 13 € |
6 durites d’évacuation d’eau de pluie Ref : 7+7a – Planche 1 – | 40 € |
Total reinforcements and bindings | 2 797 € |
Total body parts | 19 365 € |
Trim elements, chrome and stainless steel | 12 115 € |
1 Set of rubber flaps with metal fixings | 82 € |
Covering of diamond-tipped aluminum beams | 175 € |
Jack nipple riders, set of 4 stainless steel parts with foam seals | 60 € |
Int/ext window seal with set of new Stapples, Ref 7+7A, Plate 2 | 210 € |
4 original re-chromed door strikers | 260 € |
2 Door guides Ref. 6, Plate 9, | 121 € |
Catalogue 2022 – Page 56. | |
2 Door opening mechanisms Ref. 4, Plate 9, | 132 € |
4 chrome wing well caps Ref. 16, Plate 9, | 40 € |
4 Convertible door seals Ref. 4, Plate 3, | 180 € |
2 engraved stainless steel riser covers ) Sold with next parts | + |
2 engraved stainless steel step covers ) Sold with next parts | + |
2 engraved stainless steel door bottom trims )Sold with 4 previous parts = 6 parts | 662 € |
2 running board finishing rubber seals | 12 € |
2 door heel foam seals | 12 € |
4 Strips on the inside folds of the bottom of the door Ref. 9, Plate 9 | 210 € |
2 stainless steel moldings with rails on interior door rebate Ref. 1, Plate 9 | 325 € |
2 upper stainless steel strips for holding the leather door panels | 190 € |
2 stainless steel lower strips for holding the leather door panels | 138/ € |
2 stainless steel strips for holding carpets Ref. 15 and 15a, Plate 9 | 185 € |
2 new or restored chrome interior handles Ref. 21 and 21A, Plate 9 | 142€ |
2 polished stainless steel bowls Ref. 22, Plate 9 | 35 € |
1 Pallas ashtray (used refurbished) | 140 € |
1 Radio box for wave board + chrome frame (43 + 64) | 107 € |
4 stainless steel chopsticks, policeman’s hat + 6 stainless steel chopsticks, waistline | 1 070 € |
66 Strip fixing plates, in stainless steel with nuts and washers | 40 € |
2 Chrome reflector holders Ref. 25 and 25a, Plate 2 | 255 € |
2 chrome wing skids Ref. 28 and 28a, Plate 2 | 290 € |
2 Rear wing indicators Ref. 6 and 6a, Plate 2 | 650 € |
2 Hand-cut gaskets | 15 € |
2 new rafters with fixings | 22 € |
4 new elements with “DS 21” monogram | 37 € |
1 Special convertible license plate holder | 230 € |
2 Rear light holders | 88 € |
4 Lucas L692 lights | 152 € |
2 remanufactured Lucas L467 lights | 96 € |
2 Pallas stainless steel for carpet protection | 90 € |
1 Pallas stainless steel height selector | 40 € |
1 Pallas trunk tail T.B.E or re-chromed | 60 € |
1 Boot seal in foam rubber Ref. 33, Plate 2, | 40 € |
2 leather-wrapped trunk springs Ref. 6 and 6a, Plate 1 | 66 € |
2 Seat runner frame Ref. 11 and 11 a, Plate 5 | 256 € |
2 new seat locks Ref. 7 +7a, Plate 5 | 300 € |
4 seat rockers | 132 € |
4 stainless steel slide trims + 8 chrome bolts (168 + 16) | 184 € |
2 high point seat belt anchorages (R – L) | 53 € |
2 front retractable seat belts | 350 € |
1 Chapron edge lamp (68/69) | 120 € |
1 chrome heating outlet + 1 stainless steel trim | 80 € |
2 Chrome sun visor supports new model | 70 € |
Catalog 2022 – Page 57. | |
2 re-chromed Pallas sun visor arms (in standard exchange) | 30 € |
1 Upper bay rubber seal Ref. 17 +17a, Plate 2 | 55 € |
2 Stainless steel doorway Ref. 11 and 11 a, Plate 2 | 54 € |
2 Stainless steel top of window with stainless steel gasket, Ref. 14 and 14a, Plate 2 | 650 € |
1 Aluminum window top Ref. 20, Plate 3 | 50 € |
1 Grey windscreen seal with long lip, special convertible | 75 € |
1 Convertible rear bumper, Ref. 35, Plate 2 | 1 390 € |
2 Stainless steel hood box strips with small central seal Ref. 4 and 4a, Plate 2 | 667 € |
2 stainless steel door top strips, Ref. 5 and 5a, Plate 2 | 170 € |
2 Chrome exterior mirrors with Stapples, Ref. 23, Plate 9 | 170 € |
2 new stainless steel front indicators | 165 € |
2 stainless steel headlight rings with stainless steel seal | 152 € |
1 Refurbished interior mirror plus chrome | 189 € |
1 gooseneck for interior mirror (in standard exchange) | 39 € |
Upholstery and insulation including supports and carpets | 9 928 € |
1 Set of body insulation Ref 3+4+6+6A+8+8A+9+18, Plate 4 | 202 € |
1 Set 14-piece black leather upholstery (+5+5a Plate 4 and sheet metal to the height selector) | 8 077 € |
1 Boot trim set Ref 14+15+15A+16+16A+17+19, Plate 4 | 530 € |
1 Set of carpets on natural jute | 984 € |
1 Dunlopilo game new | 135 € |
Elements common to the sedan in standard exchange | 7 062 € |
5 Refurbished rims with central nut | 600 € |
4 PALLAS stainless steel wheel covers in 380 re polished | 440 € |
2 Wide chrome wiper arms | 90 € |
2 stainless steel wiper blades for wide arms | 33 € |
1 HP pump (3 pulleys) LHM | 313 € |
1 LHM re-clutch corrector | 126 € |
6 LHM Spheres | 498 € |
1 Centrifugal regulator LHM | 154 € |
1 LHM steering rack | 770 € |
2 LHM height correctors | 118 € |
1 Revised 5-stage Weber carburettor with original parts | 550 € |
1 Hydraulic carburettor control | 46 € |
1 Air filter sandblasted, primed and repainted | 80 € |
1 Complete clutch (mechanism 129€, disc 360€, thrust bearing 63€) | 552 € |
1 Alternator 68-75 adjusted with its regulator | 260 € |
1 Reconditioned front bumper | 878 € |
1 Copper harness engine radiator, 3 rows of tubes | 406 € |
1 Heating radiator overhauled or with new harness | 98 € |
2 brake calipers 66-75 | 242 € |
4 Reconditioned or original front light optics in very good condition | 380 € |
1 Set of 4 barrels with 2 keys (ignition, doors, trunk) | 180 € |
1 On-board assembly, sandblasted and repainted (stand – crank) | 80 € |
1 refurbished contactor | 78 € |
2 horns (one road + one city) refurbished | 90 € |
Elements common to the sedan, fitted new | 5 499 € |
1 Water pump 66-75 | 65 € |
1 Set of new water hoses | 165 € |
1 Thermostat DS 21 | 15 € |
2 Dynamic headlight control lever tips | 22 € |
2 Rubber seals between front wings and doors | 22 € |
2 rubber seals between front fenders and bonnet + Stapples | 20 € |
2 rubber seals between front fenders and bumpers + Stapples | 18 € |
4 coffee makers (2 front + 2 rear) | 77 € |
1 Grey heating sleeve | 11 € |
1 Throttle control Silent-bloc |
19 € |
4 Large air ducts with foam | 57€ |
4 Meters of small air duct | 33 € |
Catalogue 2022 – Page 58. | |
8 new round stops (for front and rear arms) | 33 € |
4 pivot ball joint covers | 22 € |
1 Set of parking brake pads with anti-noise clips | 38 € |
1 Pair of brake discs | 88 € |
1 Set of brake pads | 55 € |
1 Renovation kit for the front and rear suspension cylinders | 52 € |
1 Set dust cover with balls and Stapples for rear suspension | 123 € |
1 Set of rear brake pads | 50 € |
1 Renovation kit for the rear brake cylinders | 27 € |
2 Bellows and 2 rubber protections for transmission | 80 € |
2 Michelin XAS 180/15 tires (with tubes + mounting, balancing) | 624 € |
2 Michelin XAS 165/15 tires (with tubes + mounting, balancing) | 602 € |
2 new engine mounts | 110 € |
1 Valéo starter or equivalent, new | 236 € |
1 DS battery (VARTA) | 155 € |
Starter relay « MARGUERITE » | 75 € |
1 New main electrical harness | 411 € |
1 new lighter, 1, 2, 3, « IGNATION » | 313 € |
1 new ignition coil | 55 € |
1 New ignition harness with plastic caps | 20 € |
4 new insulating tubes | 10 € |
4 new candles | 9 € |
1 Clutch cylinder renovation kit | 44 € |
1 Oil filter with its large cardboard gasket | 13 € |
1 new cylinder head gasket | 37 € |
1 Set of new body caps (metal and rubber, 22 pieces) | 60 € |
1 new grey leatherette bellows for the large aluminum duct, with frame | 122 € |
1 Set of spare wheel fixing straps | 35 € |
1 Clear Triplex windshield | 230 € |
1 Sealing kit (American mastic) | 30 € |
1 Set of special ID/DS license plates | 76 € |
1 Gear lever rubber seal | 22 € |
1 Fuel pump | 55 € |
1 fuel filter (before the fuel pump) | 8 € |
1 New fuel tank | 495 € |
1 Internal fuel tank gauge | 68 € |
5 new transmission belts | 38 € |
3 stainless steel cones for the dashboard buttons | 30 € |
1 Roll of U-shaped foam seals | 18 € |
1 Set of new LHM hoses | 127 € |
2 hoses + swivel fittings replacement kit | 203 € |
10 Liters of LHM | 76 € |
Summary : | |
Naked standard kit | 13 316 € |
Full hood mechanism | 3 252 € |
Reinforcements and connecting plates | 2 797 € |
Trim elements including chrome and stainless steel | 12 115 € |
Upholstery and insulation including supports and carpets | 9 928 € |
Total specific convertible parts | 41 408 € |
Catalogue 2022 – Page 59. | |
Elements common to the sedan in standard exchange | 7 062 € |
Elements common to the sedan fitted new | 5 499 € |
Total complete standard kit 68 | 53 969 € |